PDE Part #: 14-1004
UPC #: 664880-10065 Drive module to fit, older, Compaq Proliant removable hard drive tray. For 3.5" 68 pin wide drives, either 1" or 1/2 ht. Includes tray, covers, and hardware kits.
PDE
Part #: 14-1005
UPC #: 664880-10066 Drive module to fit, older, Compaq Proliant removable hard drive tray. For 3.5" SCA 80 pin hard drives, either 1/2 ht or 1". Includes tray, covers, and hardware kits.
PDE
Part #: 14-1122 Hard drive kit to be used with 3.5" SCA hard drives. Designed to fit IBM NETFINITY: EXP 10 / EXP 15 Systems. Drives will plug directly into the back plane in the hdd system.
PDE
Part #: 14-1027
UPC #: 664880-10068 PDE manufactured to fit mounting kit for IBM RS 6000 500 series systems. Holds 2 3.5" hard drives. Comes complete with dual drive bracket, cables and Panasonic fan.
PDE
Part #: 14-1031
UPC #: 664880-10034 Hard drive kit to fit 3.5" to 5.25" for 3.5" hard disk drives. Comes with bracket, hardware and beige faceplate. For all 3.5" hard drives. Converts drive to fit into a 5.25" bay.
PDE
Part #: 14-1032
UPC #: 664880-10032 Drive module to fit 3.5" to 5.25" for 1" high, removable media drives. Comes with bracket and faceplate with 1" high opening. For floppy drives, Zip or 1" tape drives. Converts drive to fit in a 5.25" hdd bay.
PDE
Part #: 14-1047
UPC #: 664880-10033 Drive module to fit 3.5" to 5.25" for 3.5" hard disk drives. Comes with bracket and hardware--no faceplate. For all 3.5" hard drives. Converts drive to fit into a 5.25" hdd bay.
PDE
Part #: 14-1048
UPC #: 664880-10039 Hard drive mounting kit for 2.5" hard drives. Converts any 2.5" IDE hard drives to 3.5" form factor. Converts 44 pin 2mm pitch connector to standard 40 pin .1" pitch header and 4 pin power connectors. Kit includes bracket, hardware and adapter board.
PDE
Part #: 14-1612 2.5" hard drive mounting kit for SATA notebook hard drives. Converts the form factor of any 2.5" SATA hard drive to a 3.5" form factor. Converts the drive connector to a standard SATA data connector and 4 pin power connector. Includes bracket, hardware, and adapter cable.
PDE
Part #: 14-1059
UPC #: 664880-10040 Hard drive mounting kit for 1" high removable media drive for the Apple 7200, 7400, 7600 or G3 desktop computer. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drives. Comes with mounting bracket, bezel and hardware.
PDE
Part #: 14-1060
UPC #: 664880-10041 Hard drive mounting kit for 1" high removable media drive for the Apple 8600, 9600 or G3 mini tower system. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drives. Comes with mounting bezel and shield.
PDE
Part #: 14-1061
UPC #: 664880-10042 Hard drive mounting kit for 1" high removable media drive for the Apple 8500 and 9500 system. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drive. Comes with bracket, bezel and hardware.
PDE
Part#: 14-1068 Drive module to fit 3.5" to 5.25" drive for 3.5" hard drives. Comes with bracket, hardware and beige and black faceplate. For all 3.5" hard drives. Converts drive to fit into a 5.25" bay.
PDE
Part #: 14-1075A
UPC#: 664880-10085 Manufactured to fit 3.5" HDD Removable Caddy with metal frame, fan and IDE HDD removable shuttle.
PDE
Part #: 14-1052
UPC #: 664880-10049 Manufactured to fit removable drive tray for 3.5" 68 pin wide hard drive. Adapts 3.5" 68 pin wide drive to 5.25" form factor and allows for drive to be hot swapped. It is all metal with aluminum sides for heat dissipation. Comes with fan, front drive lock and drive activity and power LED's and drive ID LCD.
PDE
Part #: 14-1053
UPC #: 664880-10050 Manufactured to fit removable drive tray for 3.5" SCA hard drive. Adapts 3.5" SCA drive to 5.25" form factor and allows for drive to be hot swapped. It is all metal with aluminum sides for heat dissipation. Comes with fan, front drive lock and drive activity and power LEDs and drive ID LCD.
PDE Part #: 14-1148 for 1" drives
PDE Part#: 14-1150 for 1.6" drives Manufactured to fit removable drive tray for the HP LH3/4 Netserver. Accommodates Ultra 2 hard drives. The tray comes in 1" low profile and 1.6" half height versions. The Netserver has a 6 drive hot swap storage cage and drives of different height may be mixed and matched within the storage cage. Disk spacers, a filler panel between one drive and an adjacent drive, comes with each drive kit. Disk spacers, may be needed when mixing low profile and standard half height in the storage cage.
PDE
Part #: 14-1087 Drive module to fit 3.5" SCA hard drives. Designed to fit IBM NETFINITY: 5000, 5500, 7000 Systems. Drives will plug directly into the back plane in the system.
PDE
Part #: 14-1221-11 3.5" HDD Tray - Beige Color
Fits PDE E100, E300, E400 and various rackmount enclosures.
PDE
Part #: 14-1221-14 3.5" HDD Tray - Black Color
Fits PDE E100, E300, E400 and various rackmount enclosures.
PDE
Part #: 14-1281-04 3.5" HDD Tray - Black
Fits E302, E304, E305 and various 1U and 3U rackmount enclosures.
^ Top
All rights reserved. All products are third party products, not original
equipment. COMPAQ, PORTEGE, NETFINITY, DELL, NETFINITY, OPTIPLEX, IBM,
SUN, TOSHIBA, HP and PROLIANT are trademarked by respective companies.
PDE products are not Compaq authorized products.
Drive module to fit, older, Compaq Proliant removable hard drive tray. For 3.5" 68 pin wide drives, either 1" or 1/2 ht. Includes tray, covers, and hardware kits. 
Hard drive kit to be used with 3.5" SCA hard drives. Designed to fit IBM NETFINITY: EXP 10 / EXP 15 Systems. Drives will plug directly into the back plane in the hdd system.
PDE manufactured to fit mounting kit for IBM RS 6000 500 series systems. Holds 2 3.5" hard drives. Comes complete with dual drive bracket, cables and Panasonic fan. 
Hard drive kit to fit 3.5" to 5.25" for 3.5" hard disk drives. Comes with bracket, hardware and beige faceplate. For all 3.5" hard drives. Converts drive to fit into a 5.25" bay.
Drive module to fit 3.5" to 5.25" for 1" high, removable media drives. Comes with bracket and faceplate with 1" high opening. For floppy drives, Zip or 1" tape drives. Converts drive to fit in a 5.25" hdd bay. 
Hard drive mounting kit for 2.5" hard drives. Converts any 2.5" IDE hard drives to 3.5" form factor. Converts 44 pin 2mm pitch connector to standard 40 pin .1" pitch header and 4 pin power connectors. Kit includes bracket, hardware and adapter board. 
2.5" hard drive mounting kit for SATA notebook hard drives. Converts the form factor of any 2.5" SATA hard drive to a 3.5" form factor. Converts the drive connector to a standard SATA data connector and 4 pin power connector. Includes bracket, hardware, and adapter cable. 
Hard drive mounting kit for 1" high removable media drive for the Apple 7200, 7400, 7600 or G3 desktop computer. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drives. Comes with mounting bracket, bezel and hardware.
Hard drive mounting kit for 1" high removable media drive for the Apple 8600, 9600 or G3 mini tower system. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drives. Comes with mounting bezel and shield. 
Hard drive mounting kit for 1" high removable media drive for the Apple 8500 and 9500 system. Can accommodate 3.5" FDD, Zip, Jaz or 3.5" tape drive. Comes with bracket, bezel and hardware.
Drive module to fit 3.5" to 5.25" drive for 3.5" hard drives. Comes with bracket, hardware and beige and black faceplate. For all 3.5" hard drives. Converts drive to fit into a 5.25" bay.
Manufactured to fit 3.5" HDD Removable Caddy with metal frame, fan and IDE HDD removable shuttle. 
Manufactured to fit removable drive tray for the HP LH3/4 Netserver. Accommodates Ultra 2 hard drives. The tray comes in 1" low profile and 1.6" half height versions. The Netserver has a 6 drive hot swap storage cage and drives of different height may be mixed and matched within the storage cage. Disk spacers, a filler panel between one drive and an adjacent drive, comes with each drive kit. Disk spacers, may be needed when mixing low profile and standard half height in the storage cage.
Drive module to fit 3.5" SCA hard drives. Designed to fit IBM NETFINITY: 5000, 5500, 7000 Systems. Drives will plug directly into the back plane in the system. 
3.5" HDD Tray - Beige Color
3.5" HDD Tray - Black Color
3.5" HDD Tray - Black